9th International Symposium on High-Temperature Metallurgical Processing

Pyrometallurgical Processing.- Recovery of Aluminium and its Compounds with Hydro and Pyrometalurgical Methods from Non-metallic Residue.- Purification of Molten Zinc Chloride-Alkali Chloride by Cementation Reaction.- Thermodynamic Analysis of Smelting of Spent Catalysts for Recovery of Platinum Group Metals.- Preparation of Titanium Foams through Direct Electrolysis of the Sintered CaO-TiO2 in Molten Salt CaCl2.- Experimental Study on Oxidative Desulfurization and Selective Reduction of Molten Copper Slag.- Recycling SiO2 and Al2O3 from the Metallurgical Slag of Nickel Laterite Ores in Molten Sodium Hydroxides.- Remove Sulfur in Copper Dross from Refining Lead by Converting Process.- Part 6. Treatment and Recycling of Metallurgical Slag/Solid Wastes.- Recovery of Fe-Cu Alloys from Copper Slags.- Physiochemical Properties of High Alumina Blast Furnace Slag.- Effect of Cooling Rate on the Acidolysis of Titania Slag.- Structural Analysis of Ge-containing Ferrous Calcium Silicate Magnesia Slag forApplications of Black Copper Smelting.- Selective Recovery of P and Mn from Steelmaking Slag by Carbothermic Reduction.- The Use of Zirconia-based Solid Electrolytes Oxygen Sensor in High Titanium Slag.- In-situ Observation of the Precipitation Behavior of Dy2O3 Containing Slag System.- Recovery of Zn and Mn from Spent Alkaline Batteries.- Part 7. Ironmaking, Steelmaking and Casting.- Optimization of Exothermic Riser Sleeve Design Parameters.- Assessment of Gas-Slag-Metal Interaction during a Converter Steelmaking Process.- On the Role of Nb on the Texture and Mechanical Properties of a Novel As-rolled Medium Carbon Wear Resistant Slurry Pipeline Steel.- A Statistical Analysis of Process Abnormalities in Slab Casting.- Effect of Density Difference on Particle Segregation Behaviors at Bell-less Top Blast Furnace with Parallel-type Hopper.- The Effect of Austenitizing Temperature on Hardenability, Precipitation and Mechanical Properties of Boron Bearing Cr-Mo Alloy Steel.- Part 8. Agglomeration and Direct Reduction of Complex Iron Ores.- Study on Direct Reduction Melting Separation-leaching Process of Disposal Rare Earth Composite Iron Ore.- Reduction Behavior of Garnierite Using Methane by Roasting-Magnetic Separation Method.- Effect of Calculation Method of CaO Addition on Liquid Phase Fluidity.- Effect of Carbon Coating on Magnetite Reduction.- Optimization Method for Iron Ore Blending Based on the Sintering Basic Characteristics of Blended Ore.- Study on Direct Reduction of Low-grade Iron Ore-coal Mini-pellets in Coal-based Rotary Kiln.- Part 9. Poster Session I.- Controlled Synthesis of TiC Nanoparticles Using Solid Oxide Membrane Technology in Molten CaCl2.- Effect of Chemical Components of Mould Flux on Dissolution Rate of Al2O3 into Molten Flux for High Manganese High Aluminum Steel.- Effect of Temperature on Oxidation Behavior of Cr-Mo-V Steel with Different Cr Contents for High-speed Train Brake Discs.- Electrochemical Preparation of Ti5Si3/TiC Composite from Titanium-rich Slag in Molten CaCl2.- Evolution of Al-Ti-Mg-O Inclusions during Refining and Casting Process of Interstitial Free Steel.- Experimental Study on Carburization of Higher Vanadium-bearing Hot Metal.- Hematite Precipitation from High Iron Solution in Hydrometallurgy Process.- Influence On The Crystallization Phase Of Mold Flux By Magnetic Fields.- Kinetics Study on Limestone Decomposition in Early Converter Slag.- Mathematical Modeling and Analysis of Converter Slagging and Steelmaking Process by Replacing Part of Lime With Limestone.- Research of Digital Platform and Process Guidance Model in EAF Steelmaking Process.- Research on Factors Affecting and Prediction Model of Silicon Content in Hot Metal of Corex.- Studied on the Cooling Effect of CO2 on the Temperature of Vanadium in Converter.- Study on Grain Size and Porosity of the Produced Lime from Limestone in Early Converter Slag.- Study on Reducing Al2O3 Inclusions by Optimizing Refining Slag.- Study on the Volatilization of Sb2S3 in Vacuum.- The Effects of ZrO2, Y2O3 and Sc2O3 on the Properties of Mould Fluxes for High Manganese High Aluminum Steels.- Thermogravimetric Analysis and Kinetic Study of the Calcification Roasting of Vanadium Slag.- Viscosity of Mould Flux under Electromagnetic Field.- Part 10. Poster Session II.- Analysis of Microwave Drying Behavior of Nickel Laterite.- Analysis of Operational Parameters Affecting Metallization Degree of DRI in Reduction Shaft of COREX Process and Improvement Measures.- Dechlorination of Zinc Oxide Dust by Microwave Rosating with RSM Optimization.- Effect of TiO2 on the Viscous Behavior of High Alumina Blast Furnace Slag.- Fundamental Research on the Iron Nugget Process from Carbon Composite Pellet.- Influence of Coke Quality on Main Technical Indexes of Blast Furnace.- Kinetic Analysis of Blast Furnace Dust Recycling with Flash Reduction Process at High Temperature.- Preparation and Characterization of Iron-coke Briquette.- Preparation of Oxidized pellets with Chrome Ore.- Research and Application of Sintering Surface Steam Spraying Technology for Energy Saving and Quality Improvement.- Research on Bonding Mechanism of Sintering Grate.- Research on Optimizing Sinter Ore Matching Based on the High Temperature Characteristic Numbers.- Research on the Mineral Composition and Microstructure Changes of Iron Ore Sinter during the Gas-Solid Reduction.- Roasting Kinetics of Molybdenite Concentrates.- Study on Influences of Different Ti-bearing Materials on MgO-bearing Pellets Metallurgical Properties.- Supergravity Separation of Pb and Sn from Waste Printed Circuit Boards.- The Effect of Temperature and Additive on Transport and Transformation of P of High-phosphorus Iron Ore during Carbothermic Reduction.- Thermodynamic Calculations on Direct Reduction of Chromium-bearing Vanadium Titanium Magnetite.